Product
Permabond Permabond TA4630
Two-part structural acrylic with a product-specific table covering acetal, polyolefins, metals, PET-G and GRP.
This is structural acrylic, so everything true of that chemistry applies here too.
Specification
- Form
- Paste
- Mix ratio
- 1:1
- Working time
- 6 minutes
- Handling time
- 50 minutes
- Full cure
- 24 hours
- Service temperature
- -55C to 100C
- Fills gaps up to
- 1 mm
- Water resistance
- Water resistant
- Full cure time
- 24.0000 hours (At 23 C) Manufacturer verified
- Handling time
- 50.0000 minutes (Upper end of 40-50 minute handling-time range at 23 C) Manufacturer verified
- Maximum service temperature
- 100.0000 C (Service-temperature ceiling in official TA46XX product-range table) Manufacturer verified
- Minimum service temperature
- -55.0000 C (Depends on materials being bonded) Manufacturer verified
- Manufacturer substrate wording
- low-surface-energy plastics such as polypropylene and polyethylene; metals, composites and other plastics Manufacturer verified
- Working time
- 6.0000 minutes (Upper end of 4-6 minute pot life for 2 g + 2 g at 23 C) Manufacturer verified
What it bonds
Where the manufacturer names a material, we quote them. Where we have assessed it ourselves, we say so and grade it lower. The two are never merged.
| Material | Basis | Manufacturer wording |
|---|---|---|
| Aluminium | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| GRP / fibreglass | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| HDPE | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| Mild steel | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| PETG | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| Polypropylene | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| POM (Delrin) | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
| Stainless steel | Listed by the manufacturer A | “Permabond TA4630 provisional TDS substrate performance table” |
Preparation
Clean and dry the actual grade. Follow the current TDS and the Permabond acetal preparation guidance.
Limitations
The source is a provisional TDS. A single-substrate table entry does not establish every dissimilar pair or every acetal formulation.
Sources
- Permabond TA4630 Provisional Technical Datasheet (TDS)
- Permabond TA46XX Structural Acrylic Product Flyer (APPLICATION_GUIDE vTA46XX Flyer UK 2021)
Last reviewed 8 October 2026.