Product
Bostik EVO-STIK Impact Adhesive Spray
Aerosol contact spray adhesive. Manufacturer TDS explicitly lists both metal and cork among bonded substrates.
This is spray adhesive, so everything true of that chemistry applies here too.
We may earn a commission from links on this page. It never changes which adhesive we recommend.
Specification
- Form
- Spray
- Working time
- 25 minutes
- Service temperature
- -20C to 45C
- Application temperature range
- +5C to +35C C Manufacturer verified
- Maximum service temperature
- 45.0000 C (Published in the superseded 2018 TDS; the current 2024 TDS omits service temperature) Strong evidence
- Minimum service temperature
- -20.0000 C (Published in the superseded 2018 TDS; the current 2024 TDS omits service temperature) Strong evidence
- Manufacturer substrate wording
- ideal for bonding a wide range of materials, including metal, wood, ceramics, rigid plastics, cork Manufacturer verified
- Working time
- 25.0000 minutes (Upper end of the current TDS wet window; tack develops in 1–3 minutes) Manufacturer verified
What it bonds
Where the manufacturer names a material, we quote them. Where we have assessed it ourselves, we say so and grade it lower. The two are never merged.
| Material | Basis | Manufacturer wording |
|---|---|---|
| Cork | Listed by the manufacturer A | “ideal for bonding a wide range of materials, including metal, wood, ceramics, rigid plastics, cork” |
| Glass | Listed by the manufacturer A | “ideal for bonding a wide range of materials, including metal, wood, ceramics, rigid plastics, cork, foam backed carpet, underfelt, carpet tiles, hardboard, leather and glass” |
| Leather | Listed by the manufacturer A | “ideal for bonding a wide range of materials, including metal, wood, ceramics, rigid plastics, cork, foam backed carpet, underfelt, carpet tiles, hardboard, leather and glass” |
| Cast iron | Implied by the manufacturer B | “ideal for bonding a wide range of materials, including metal, wood, ceramics, rigid plastics, cork” Abrade first |
Preparation
Work in warm, well-ventilated conditions. Surfaces must be dry, clean and free from dust, dirt and grease; protect adjacent surfaces from overspray.
Limitations
Interior-oriented aerosol. Do not use on plasticised flexible PVC/vinyl, polystyrene, solvent-sensitive, asphalt or bituminous surfaces. Water resistance is undocumented. The service range comes from a superseded 2018 TDS and should be re-confirmed with Bostik for critical work.
Sources
- EVO-STIK Impact Spray Adhesive - Technical Data Sheet (TDS00162) (TDS vTDS00162)
- EVO-STIK Impact Spray Adhesive — Technical Data Sheet TDS00162 (TDS vTDS00162, 23 April 2024)
- EVO-STIK Impact Spray Adhesive — Technical Data Sheet TDS00162 (2018 issue) (TDS vTDS00162, 14 November 2018)
Last reviewed 8 October 2026.